manualshive.com logo in svg

EUROCOM NEPTUNE 4, User Manual

The EUROCOM NEPTUNE 4 is a powerful gaming laptop that promises top-notch performance. To get the most out of your device, be sure to download the User Manual for free at manualshive.com. This comprehensive manual will guide you through all the features and settings of your new laptop.

Share
Download
background image

Modules

Sound Blaster Audio 7 - 77

7

Hot Key Configuration

Click 

Configure Hot Keys

 in 

Scout Mode

 or 

Advanced Settings

 menus to access

the 

Hot Key Configuration

 menu. Click 

Enable All Hot Keys, 

and then click on

the task and press the key sequence required. Any hotkeys chosen will be locked by
the application, and therefore will not be able to be used in other applications.

Figure 7 - 63

Sound Blaster X-Fi 3 

Hot Key 

Configuration

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Reviews:

No comments

Related manuals for NEPTUNE 4

Panasonic CF-74ECBGDBM Service Manual preview
CF-74ECBGDBM
Brand: Panasonic Pages: 50

Brands by name

Popular brands

Load more brands