EUROCOM NEPTUNE 4 User Manual Download

Page: 188 / 346

Upgrading The Computer

6 - 26 Upgrading the System Memory (RAM)

Removing the Component Cover (Model B)

Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.

Remove screws

from the bottom and rear of the computer

Slide the component bay cover until the cover and case indicators

are aligned.

Lift the cover

off the computer.

Figure 6 - 23

Component Cover

Screws

(Model B)

Figure 6 - 24

Component Cover

Move & Removal

(Model B)

Model B

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Search results

Summary of Contents for NEPTUNE 4

Reviews:

Related manuals for NEPTUNE 4

Brands by name

Popular brands

EUROCOM NEPTUNE 4, User Manual

Search results

Summary of Contents for NEPTUNE 4

Reviews:

Related manuals for NEPTUNE 4

Brands by name

Popular brands