manualshive.com logo in svg

EUROCOM NEPTUNE 4, User Manual

The EUROCOM NEPTUNE 4 is a powerful gaming laptop that promises top-notch performance. To get the most out of your device, be sure to download the User Manual for free at manualshive.com. This comprehensive manual will guide you through all the features and settings of your new laptop.

Share
Download
background image

Modules

Wireless LAN Module 7 - 25

7

PC Monitor

The 

PC Monitor

 logs performance information on the computer. Use the drop-

down menu to select Processor, Memory, FPS (frames per second), Wireless Signal
Strength and Internet Bandwidth. You can click on the graph to display to display
the time and measurement at that point.

Figure 7 - 16

Killer Network 

Manager - PC 

Monitor 

(Wireless Signal 

Strength)

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Reviews:

No comments

Related manuals for NEPTUNE 4

Brands by name

Popular brands

Load more brands