Essilor Pro-B 300, User Manual

Page: 71 / 140

The selected eye has an orange frame around it.
4. D-dimension modification
5. A-dimension modification
6. Modification of half A-dimensions (temporal / nasal)
7. B-dimension modification
8. Modification of half B-dimensions (upper / lower)
9. Modification of the overall size of the shape
Scaling in relation to boxing center
10. Shape rotation around the boxing center
11. Free-form modification
◦ Modification focused on the center of the selected area.
◦ Uniform modification across all points of the selected area.
12. Shape retouch
◦ Retouch to create a straight line.
◦ Retouch to create a curve.
◦ Retouch to create an angle.
13. Modify both eyes simultaneously or not
14. Modify the selected value
The modification is carried out in 0.5 mm or 1 mm steps depending on the precision settings
(
F
p.104)
.
15. Create a new job based on the job displayed
16. Back to the centering screen
◦ Press to save the changes and return to the centering screen.
◦ Press to return to the centering screen without saving the changes.
2. M
ODIFYING A SHAPE
The shape modification screen gives you access to several functions:
• Simple modifications
(
F
p.72)
: D-dimension, boxing dimensions, modification of size and rotation of
the shape
• Free modification
(
F
p.74)
, within the constraints pertaining to lens edging
• The retouching of a shape
(
F
p.75)
in the event of possible tracing defects
Shape modifications and retouches are only applied if all the dimensions and half-dimensions limits are
included.
U
SER
M
ANUAL
> IV. M
ODIFYING THE LENS SHAPE
71
Pro-B 300 > v1.0 - 03.19