Essilor Pro-B 300, User Manual

Page: 84 / 140

If the image is badly centered, repeat the operation.
Manually position the drill holes of the shape locating them using the picture.
b. Delete one drilling point
Select the drilling point to be deleted.
If you want to delete all drilling points from the shape, select any of them.
The drilling point is displayed in red.
Press .
Two buttons are displayed: .
Press:
• to delete the selected drilling point, or
• to delete all drilling points from the shape.
The selected drilling point or all drilling points are deleted from the shape.
c. Dimensioning a drilling point
You can define a setting for each existing drilling point.
Press on the drill-hole, slot or notch to select it.
The drilling point is displayed in red in the shape.
>
>
>
>
2
1
2
3
1
Pro-B 300 > v1.0 - 03.19
84
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB