Essilor Pro-B 300, User Manual

Page: 70 / 140

This chapter describes the lens shape modification procedures:
• Description of the shape modification screen
(
F
p.70)
• Modifying the lens shape
(
F
p.71)
• Archiving shapes
(
F
p.76)
1. L
EGEND SCREEN
From the centering screen, press to access the shape modification screen.
The following screen is displayed:
1. Work area
Colors which may appear on screen:
◦ (white) Current shape (from the traced shape) and associated drilling points
(cyan) Current shape (obtained by symmetry with the traced shape) and associated drilling
points
◦ (light red) Shape before modification
◦ (grey) Part of the shape not selected for the current modification
◦ (purple) Smallest possible shape
◦ (pink) Limit of the no-accessory area
◦ (yellow) Limit of the drilling zone
◦ (red) Non-machinable shape
◦ (blue) Reference drilling points
◦ (green) Lens already blocked
Binocular view
2. Half PD and pupillary height
3. Active eye
Pro-B 300 > v1.0 - 03.19
70
U
SER
M
ANUAL
> IV. M
ODIFYING THE LENS SHAPE