Essilor Pro-B 300, User Manual

Page: 12 / 140

• Pro-B 300 specific calibration gauge data USB Key with Table
Options
• Barcode reader
• Roll of barcode labels
• Start Pedal
Connection accessories
• Power cable
• RJ45 cable for the tracer-edger connection
• Essibox connection cable
2. I
NSTRUCTIONS FOR USE
In this section, you will find all the information concerning the following:
• Turning the device on
(
F
p.12)
and off
(
F
p.12)
• The use of the touch screen and the keyboards,
(
F
p.13)
• The description of the tracer work screen
(
F
p.14)
.
a. Turning on device
Before the device is turned on, make sure the tracing table is empty (depending on the version).
To switch on the tracer, press the main switch located at the rear of the machine.
Press the ON/OFF button under the touch screen.
The device is initialized.
A beep indicates that the initialization was successful.
b. Turn off the device
Briefly press on the ON/OFF buttons located under the touch screen or press /, then .
Do not press the ON/OFF button for several seconds. This would result in shut-down of the device
and a warning message would be displayed at the next switch-on.
A confirmation message is displayed on each screen.
Press to confirm.
The device turns off.
>
>
>
>
1
2
3
1
2
Pro-B 300 > v1.0 - 03.19
12
U
SER
M
ANUAL
> I. F
IRST STEPS