Essilor Pro-B 300, User Manual

Page: 85 / 140

Press a few seconds on the setting to be modified:
• Diameter
• Depth (for non-through holes)
• Length of slot or notch
• Angle of slot or notch
The numeric keypad is displayed.
You can also use the or buttons to decrease or increase the selected value.
Enter the new value of the parameter and press to confirm.
The drilling point has been modified.
Grouping the drilling points
If you need to modify several drilling points simultaneously, you can group them together provided
they are on the same side of the shape (nasal side / temporal side).
By default, the symbol is displayed: each drilling point can be modified individually.
• Press .
> is displayed. All future modifications will be applied to all drilling points in the same way:
◦ only the reference drilling point is modifiable,
◦ the coordinates of the other drilling points are greyed out.
• To ungroup the drilling points, press again.
>
>
2
3
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB
85
Pro-B 300 > v1.0 - 03.19