Essilor Pro-B 300, User Manual

Page: 81 / 140

(cyan) Current shape (obtained by symmetry with the traced shape) and associated drilling
points
◦ (yellow) Limit of the no-drilling area
◦ (orange) temporal or nasal side indicator
◦ (red) Selected drilling point
◦ (blue) Reference drilling point (by default, the first one created on each side – nasal and
temporal)
◦ A drilling point with a colour infill indicates non-through drilling
Binocular view
2. Active eye
The selected eye has an orange frame around it.
3. Type of drilling
◦ Drill-hole
◦ Slot
◦ Notch
4. Drilling coordinates
◦ X and Y coordinates in relation to the boxing
&
center of the shape.
◦ Distance between the center of the drill-hole entrance point and the edge of the lens.
◦ X and Y coordinates in relation to the reference drilling point.
◦ Freezing of the distance between the drilling point and the edge of the lens.
5. Virtual mouse
Slide the stylus in this area to move the selected drilling points.
6. Drilling point dimensioning
◦ Diameter in mm
◦ default value: 1.40mm
◦ Drilling depth in mm in the case of non-through drilling
◦ default value: 0 (through-drilling)
◦ Length of slot or notch in mm
◦ default value of slot: 3.40mm
◦ Angle of slot or notch in °
◦ default value for right eye: 0° on nasal side, 180° on temporal side
◦ default value for left eye: 180° on nasal side, 0° on temporal side
7. Delete one or all drilling points
◦ Delete one drilling point
◦ Delete all drilling points
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB
81
Pro-B 300 > v1.0 - 03.19