Essilor Pro-B 300, User Manual

Page: 83 / 140

Select the type of drilling (drill-hole, slot or notch).
Press on the shape at the spot where you want to position the drilling point.
The drilling point created is displayed in red in the shape:
The drilling coordinates are displayed on the right of the work screen;
• X coordinates
• Y coordinates
• Distance in relation to the edge of the lens.
• X coordinates in relation to the reference drilling point
• Y coordinates in relation to the reference drilling point
Press to copy the drilling points from the nasal area to the temporal area and vice-versa.
On the tracer, you can configure up to 6 drilling points per side (nasal and temporal) of a shape.
Picture mode
After tracing a pattern, it is possible to retrieve the drill-holes on the corresponding demo lens:
Position the demo lens (corresponding to the pattern) in the centering chamber, press .
For picture mode, it is not necessary to mark the lens, the posiblock can also be kept: it is a simple
shot.
The photograph of the demo lens appears to be positioned correctly in the picture of the shape:
>
>
>
2
3
1
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB
83
Pro-B 300 > v1.0 - 03.19