Essilor Pro-B 300, User Manual

Page: 80 / 140

This chapter describes the procedure for the positioning of drilling points (drill-holes, slots, notches) on a
lens.
• Description of the drilling screen
(
F
p.80)
• Configuring drilling settings
(
F
p.82)
• Drilling models
(
F
p.88)
Once the drilling parameters have been set, you can go on to the centering of the lens.
Prerequisite: to access this screen, you must already have carried out lens tracing.
Optical tracing
If you trace a demo lens or a pattern using the optical tracing function, the drilling screen is displayed
automatically once the tracing is complete.
Glass lenses
The drilling function is not available for glass lenses.
1. L
EGEND SCREEN
From the centering screen press to access the drilling screen.
The following screen is displayed:
1. Work area
Colors which may appear on screen:
◦ (green) Current shape (from the traced shape) and associated drilling points
Pro-B 300 > v1.0 - 03.19
80
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB