Essilor Pro-B 300, User Manual

Page: 34 / 140

If the tracer does not detect either the focimeter dots or the line on the lens an error message will be
displayed: check and / or mark the lens again with the focimer dots or the line. If the tracing fails
after the check, do a mechanical tracing using the pattern holder.
The numeric keypad is displayed.
Enter the value of the D-dimension, then press to confirm.
The drilling screen is displayed.
Configure the drilling points if required.
For more information, refer to the section Preparing a drilled job
(
F
p.79)
.
Press to go to the centering screen.
Tracing - tracing mode
In tracing - tracing mode, the result of the tracing is displayed in the work area of the tracing screen.
For more information on working modes, refer to the section Tracing > Tracing environment > Jobs
and working modes.
(
F
p.21)
.
Before Centering
Once tracing has been carried out, you can:
• Input the wrap angle and the frame base, for optimal centering precision
• Add drilling points to the shape. For more information, consult the chapter Preparing a drilled job
(
F
p.79)
.
>
>
>
5
6
7
Pro-B 300 > v1.0 - 03.19
34
U
SER
M
ANUAL
> II. T
RACING