Essilor Pro-B 300, User Manual

Page: 86 / 140

d. Adjusting the position of a drilling point
You have three options for adjusting the position of a drilling point on a shape:
• Use the virtual mouse
• Use the or buttons to reduce or increase the selected value.
• Enter the exact coordinates of the drilling point directly.
The drilling coordinates are those of its entrance drill-hole.
• For a drill-hole, it is the center.
• For a slot and a notch, the entrance point is always on the side which is furthest away from the edge
of the lens:
For greater precision, when you use the virtual mouse or the and buttons, press to
zoom in on the selected drilling point: the displacement step is 0.01mm (0.1mm for normal display).
Press on the drill-hole, slot or notch to select it.
The drilling point is displayed in red.
Press a few seconds on the value corresponding to the coordinates to be modified:
• X coordinates
• Y coordinates
• Distance in relation to the edge of the lens.
>
1
2
Pro-B 300 > v1.0 - 03.19
86
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB