Essilor Pro-B 300, User Manual

Page: 111 / 140

The adjustment is done from left to right: from the most precise to the most tolerant.
The value entered by default is considered the best compromise.
This setting affects the speed of manual centering, the more refined the sensitivity and fine-tuning
(cursor completely to the left), the more time the centering will take because the harder it will be
to reach the target value.
Customizing the display of the target and shape
Press to change the color of the target.
Each press corresponds to a color (three colors are available).
Press to change the color of the shape.
Each press corresponds to a color (three colors are available).
Customizing blocking controls
1. Enabling lens fit (lens fit): .
A visual warning controls the lens fit: any portion of the lens outside of the shape is shown in red.
You can change the pupillary height and PD to put the shape back into the lens, but if this change
involves an too widely induced prism, we recommend that you order a
new lens with a better diameter.
U
SER
M
ANUAL
> VII. T
O SET UP THE DEVICE
111
Pro-B 300 > v1.0 - 03.19