Essilor Pro-B 300, User Manual

Page: 122 / 140

• Press to cancel and return to the menu
Point precisely on each cross as they are displayed, holding the stylus perpendicular to the screen so as
not to alter the calibration.
The settings menu is displayed automatically once the calibration is finished.
Press to return to the work screen.
3. S
TATISTICS AND TECHNICAL HISTORY
This menu allows you to view the number of cycles performed by the tracer and edger. It also gives you
access to the technical history.
• Tracer cycles
(
F
p.122)
• Technical history log and errors
(
F
p.124)
a. Device cycles
From the work screen, select > > to view the number of cycles carried out by the device.
The following screen is displayed:
Tracer-centerer-blocker
1. Mechanical tracings
Total number of mechanical tracings
2. Traced frame materials
The optyl frame tracing cycles are recorded in the tracing cycles of plastic frames.
3. Optical tracings
>
2
3
Pro-B 300 > v1.0 - 03.19
122
U
SER
M
ANUAL
> VIII. M
AINTENANCE
&
SERVICING