Essilor Pro-B 300, User Manual

Page: 95 / 140

◦ Trivex lens TM
◦ Glass lens
◦ Tribrid TM
The configuration of the edging cycles depends on the type of material. An incorrect choice may result in
material damage.
2. Type of cycle
◦ Standard cycle
For all types of material.
◦ EAS TM
For all types of materials. This cycle offers a more sophisticated edging mode than the standard
cycle, specifically for thin or small lenses and lenses with hydrophobic coating.
3. Type of finish
◦ Bevel
◦ Customized bevel
◦ Groove
◦ Customized groove
◦ Flat-edge
◦ Flat-edge and drilling
◦ Existing drilling disabled
4. To access the drilling preparation screen
5. Edging mode
◦ Automatic mode
The finishing parameters are automatically calculated according to the information acquired when
tracing the frame and feeling the lens.
◦ Customized mode
The finishing parameters can be fully customized.
6. Polishing
◦ Polished lens
◦ Non-polished lens
7. Front surface chamfering
◦ Small chamfer
U
SER
M
ANUAL
> VI. P
REPARING LENS EDGING
95
Pro-B 300 > v1.0 - 03.19