Essilor Pro-B 300, User Manual

Page: 88 / 140

• It is identified by the symbol # on the left of its coordinates.
You can position each drilling point in relation to the reference drilling point by modifying the values in the
columns:
• X coordinates in relation to the reference drilling point
• Y coordinates in relation to the reference drilling point
To select another drilling point as the reference drilling point:
Select the drilling point you want to use as the reference drilling point
Press to the right of its coordinates.
The selected drilling point is displayed at the top of the list:
• The symbol # is displayed on the left of its coordinates
• The drilling point is displayed in dark blue in the work area.
The coordinates of the other drilling points are also updated.
3. D
RILLING MODELS
A drilling model consists of all the drilling points configured and positioned on a shape. You can retrieve a
model in order to re-use it.
This section describes the following:
• Importing a model on a job
(
F
p.89)
• Saving a model
(
F
p.90)
>
>
1
2
Pro-B 300 > v1.0 - 03.19
88
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB