Essilor Pro-B 300, User Manual

Page: 89 / 140

a. Importing a model
This function enables you to re-use the drilling points of a job in the shape management screen in the
current job.
Importing a drilling model enables you to retrieve:
• The drilling settings (diameter, depth, length, angle)
• The height of the drilling points in relation to the center of the shape (Y coordinates)
• The distance between the reference drilling point and the edge of the lens
From the drilling positioning screen, press to access the list of drilled jobs saved in the shape
management screen.
Select the desired list.
The drilled jobs in the selected list are displayed.
Select the desired job as a drilling model.
The model is displayed in the preview.
Press to confirm import of the model.
The drilling screen is displayed:
The drilling points are positioned in keeping with:
• The settings of each drilling point in the model
• The Y coordinates of each drilling point in relation to the boxing center of the model shape
• The distance between the reference drilling point and the edge of the lens
Two values are displayed under the work area
• The D-dimension (in mm) you have entered for the tracing
>
>
>
>
>
1
2
3
4
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB
89
Pro-B 300 > v1.0 - 03.19