Essilor Pro-B 300 User Manual Download Page 101

Page: 101 / 140

Select the flag corresponding to your language.

Other languages

Press

to display the other languages.

Confirm

Press

to save the time.

Once adjustments have been completed: press

to go back to the work screen.

b. Connections

The connections are configured from the tracer. The screen which you access from the edger is only

available for consultation purposes.

To access this menu from your tracer work screen, select

The following screen is displayed:

List of devices connected to the tracer

Settings linked to the configuration of the serial port

Settings linked to the configuration of the Ethernet port

Select the mode of detection for devices connected to the tracer

◦

In automatic mode, all devices detected are connected to the tracer.

◦

In manual mode, check

the products you want to connect to the tracer.

Once the modification is made, press

to return to the work screen.

SER

ANUAL

> VII. T

SET

THE

DEVICE

101

Pro-B 300 > v1.0 - 03.19

Summary of Contents for Pro-B 300













































































































































Search results

Summary of Contents for Pro-B 300

Reviews:

Related manuals for Pro-B 300

Brands by name

Popular brands

Essilor Pro-B 300, User Manual

Search results

Summary of Contents for Pro-B 300

Reviews:

Related manuals for Pro-B 300

Brands by name

Popular brands