Essilor Pro-B 300, User Manual

Page: 72 / 140

If a portion of the shape is not included within the machinable limits, it is displayed in red.
a. Enlarging, reducing or rotating a shape
The side panel on the right of the screen enables you to:
• Modifying each dimension or half-dimension separately
• Modifier the size of a shape as a whole
• Rotating a shape around the boxing center
Modifying both eyes simultaneously
If you have done an asymmetric binocular tracing, you can modify both shapes simultaneously.
• Modification of both eyes simultaneously
• Modification of each eye separately
In symmetric monocular or binocular tracing, modifications are automatically made to both eyes.
Modifying each dimension or half-dimension separately
Select the icon showing the part of the shape you wish to decrease or increase.
A red rectangle is displayed around the icon.
Use the or buttons to decrease or increase the corresponding value and view the modification
in real time.
You can also press for a few seconds on the corresponding value to display the numeric keypad:
enter a new value and press to confirm.
The shape is modified.
The original shape is displayed in light red.
Example of an A-dimension reduction: Example of a half B-dimension reduction:
Modify the total size of the shape
Press to select modification by scaling.
>
>
>
1
2
1
Pro-B 300 > v1.0 - 03.19
72
U
SER
M
ANUAL
> IV. M
ODIFYING THE LENS SHAPE