Epson PowerLite 1825, User Manual

Page: 85 / 222

Presenting Through a Wireless Network
85
5. For the WEP encryption setting, highlight
128Bit
or
64Bit
and
press
Enter
.
6. For Format, highlight
ASCII
to enable text input or
HEX
to
enable hexadecimal input. Then press
Enter
.
7. If you chose
64Bit
, choose
Key ID 1
,
2
,
3
, or
4
.
Highlight the
Encryption key
text box that corresponds to the
Key ID you selected, then press
Enter
. Press the pointer
button to select individual letters; then press
Enter
to input a
character. To add a blank space or to navigate backward and
forward through the input text, highlight the arrows and press
Enter
. To toggle symbol settings or capital letters, highlight the
option and press
Enter
. When you’re done, highlight
Finish
and
press
Enter
.
8. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
■ For 128 bit WEP encryption with hexadecimal input, enter
26 characters, from 0 to 9 and from A to F.
■ For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■ For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
■ For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
9. When you’re done making these settings, select
Return
, select
Setup complete
, and then select
Yes
to confirm that you want
to save the changes. Press
Menu
to exit the menu system.
note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try
ASCII
first. If that doesn’t work,
try
Text2
and then
Text3
.