Epson PowerLite 1825, User Manual

Page: 145 / 222

Fine-Tuning the Projector
145
Enabling Password Protection
The default setting for the password is
0000
. Follow these steps to
create a new password:
1. Press the
Freeze
button on the remote control for about five
seconds. You see this screen:
2. Use the pointer button to select
Password
and press
Enter
.
3. When you see a message asking if you want to change the
password, select
Yes
and press
Enter
.
4. Hold down the
Num
button on the remote control and use
the numeric keypad to enter a four digit password. (The default
setting is 0000.)
5. When you see a confirmation message, reenter the password.
Then press the
Menu
button to exit the screen.
To set security options, access the Password Protect screen as
described above, and then turn on any of the following options:
■
Power On Protect
to prevent unauthorized use of the projector.
After the projector is plugged in and turned on, you must enter a
password to use the projector. For details, see page 146.
■
User’s Logo Protect
to prevent your custom screen and display
settings from being changed. None of the User’s Logo features in
the Extended menu can be changed when the User’s Logo Protect
function is enabled. For details on creating a custom screen, see
page 146.
■
Network Protect
to lock the Network settings in the menu
system (see page 59).
caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times. Also, it’s a
good idea to write down
your password.
Hold down