Epson PowerLite 1825, User Manual

Page: 155 / 222

Managing Projectors
155
7. Do one of the following:
■ If your network assigns addresses automatically, turn on the
DHCP
setting.
■
If your network does not assign addresses automatically, turn
off
DHCP
and enter the projector’s
IP Address
,
Subnet
Mask
,
Gateway Address
, and
DNS Servers
, as needed.
To enter numbers, use the pointer button on the remote
control to highlight the number you want to input, then press
the
Enter
button.
8. When you’re done making all necessary changes, select
Return
,
select
Setup complete
, and then select
Yes
to confirm that you
want to save the changes. Press
Menu
to exit the menu system.
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the
Menu
button on the remote control, select the
Network
menu, then press
Enter
.
2. Choose
Network Configuration
and press
Enter
.
3. Choose
Mail
, then press
Enter
. You see the following screen:
note
If you’re a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you’re monitoring.
note
You can also set e-mail alerts
from EMP Monitor (see
page 166).