Epson Aculaser CX21N Series, User Manual

Page: 267 / 401

Using the Control Panel 267
Please Wait
This message appears until a carriage lock is completed.
Set Document to ADF
This message appears when you set a legal size document on the document table for fax
transmission. Legal size documents can only be used in the Auto Document Feeder.
Unable to Send
Unable to perform fax transmissions. This message appears when you send a fax
manually or a color fax transmission fails. When sending a fax using the memory
transmission function, the message does not appear.
Unable to Transmit Color Fax
For color fax transmission, this message appears when fax transmission cannot be
performed while receiving a fax. When the recipient’s fax machine supports only
black-and-white faxes, this message does not appear since a color fax is transmitted as a
black-and-white fax.
Copier error messages
Document Error
This message appears when you set an original that is not supported by the product.
Need More Memory
Unable to copy due to insufficient memory of the product. Wait for a few minutes until the
current copy job is finished and try copying again, or add more memory.
When you place multiple documents on the Auto Document Feeder and make a
continuous high-quality (600 dpi) color copy with the default memory (128 MB), the product
may not work properly because of insufficient memory. We recommend adding a memory
module so that the total memory size is 256 MB or higher.
System error messages
Optional RAM error
A memory access error occurred. Check if the optional memory is installed correctly, and
then turn on the product again. If the error occurs again, contact your dealer or a qualified
customer support person for assistance.