Epson Aculaser CX21N Series, User Manual

Page: 219 / 401

Faxing (Fax Model Only) 219
3. Press the
l
Left or
r
Right button to select
On
or
Off
.
4. Press the
u
Up button several times to exit the overseas mode setting, or make other
settings if necessary.
Changing outgoing faxes settings
You can change the number of auto redial attempts and whether to print the sender’s
information with a transmission data.
Auto Redial
This function is used to specify the retry interval and the total retries when unable to
connect to the recipient due to a busy line.
Note:
The number of redial attempts can be set between 0 and 99. If you do not use the auto redial
function, select 0.
1. Press the Setup button on the control panel.
The Setup light is lit and the Setup menu appears in the LCD panel.
2. Press the
d
Down button twice to select
Fax Settings
, then press the
r
Right button.
The Fax Settings menu appears.
3. Press the
d
Down button to select
Transmssn Settings
, then press the
r
Right button.
4. Make sure
Auto Redial Tries
is selected, then press the
r
Right button.
5. Press the
u
Up or
d
Down button to specify your desired number of redial attempts.
Note:
You can also set the number of auto redial attempts by entering the number using the numeric
keypad.
6. To exit the settings, press the
l
Left button several times or another mode’s button.
Printing sender information
This function is used to print sender information with a transmission data. When Print
Sender Info
is set to
On
, the date, day of week, time, sender’s name, sender’s phone
number, and page number (fraction style display) are automatically printed at the top of the
transmission image.