Epson Aculaser CX21N Series User Manual Download Page 236

Page: 236 / 401

Using the Control Panel

236

Print mode

The default mode of this product is Print mode. While the product is in Print mode, the Print
light (green) is lit and the following screen appears.

Note:

During the printing process, you cannot access other modes.

Copy mode

To use the copy function, press the

Copy button on the control panel to enter the Copy

mode. While the product is in Copy mode, the following screen appears.

Note:

❏

Fax reception is available even while copying.

❏

If you press the

Copy button while in Copy mode, the screen returns to the Print mode.

Summary of Contents for Aculaser CX21N Series


















































































































































































































































































































































































































Search results

Summary of Contents for Aculaser CX21N Series

Reviews:

Related manuals for Aculaser CX21N Series

Brands by name

Popular brands

Epson Aculaser CX21N Series, User Manual

Search results

Summary of Contents for Aculaser CX21N Series

Reviews:

Related manuals for Aculaser CX21N Series

Brands by name

Popular brands