Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 353 / 944

set spantree protomigration Configuring Spanning Tree Port Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 6-53
set spantree protomigration
Use this command to reset the protocol state migration machine for one or more Spanning Tree
ports. When operating in RSTP mode, this forces a port to transmit MSTP BPDUs.
Syntax
set spantree protomigration port-string true
Parameters
Defaults
None.
Mode
Switch command, Read ‐ Write.
Example
This example shows how to reset the protocol state migration machine on fe.1.12:
Matrix(rw)->set spantree protomigration fe.1.12 true
show spantree portstate
Use this command to display the state (blocking, forwarding, etc.) for a port on one or more
Spanning Trees.
Syntax
show spantree portstate [ port port-string ] [ sid sid ]
Parameters
Defaults
• If port ‐ string is not specified, current state will be displayed for all Spanning Tree ports.
• If sid is not specified, current port state will be displayed for Spanning Tree 0.
Mode
Switch command, Read ‐ Only.
port ‐ string Specifies the port(s) for which protocol migration mode will be enabled.
For a detailed description of possible port ‐ string values, refer to “ Port
String Syntax Used in the CLI ” on page 4 ‐ 2.
true Enables protocol migration mode.
port port ‐ string (Optional) Displays the Spanning Tree state for specific Spanning Tree
port(s). For a detailed description of possible port ‐ string values, refer to
“ Port String Syntax Used in the CLI ” on page 4 ‐ 2.
sid sid (Optional) Displays the state for a specific Spanning Tree identifier.
Valid values are 0 ‐ 4094 . If not specified, SID 0 is assumed.