Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 752 / 944

Configuring DVMRP show ip dvmrp route
21-54 Routing Protocol Configuration
Mode
Router command, Any router mode.
Example
This example shows how to display DVMRP routing table entries. In this case, the routing table
has 5 entries. The first entry shows that the source network 60.1.1.0/24 can be reached via next ‐ hop
router 40.1.1.3. This route has a metric of 2. It has been in the DVMRP routing table for 1 hour, 24
minutes and 2 seconds and will expire in 2 minutes and 3 seconds. It supports flag messages for
verifying neighbors, pruning, generation ID and netmask in prunes and grafts (VPGN):
Matrix>Router#show ip dvmrp route
flag characters used:
-------------
V Neighbor is verified.
P Neighbor supports pruning.
G Neighbor supports generation ID.
N Neighbor supports netmask in prunes and grafts.
S Neighbor supports SNMP.
M Neighbor supports mtrace.
----------------
DVMRP Routing Table - 5 entries
60.1.1.0/24 [2] uptime: 1:24:2, expires: 0:2:3
via neighbor: 40.1.1.3 version: 3.255 flags: VPGN gen id: 0x336ff052
50.50.50.0/24 [2] uptime: 1:24:18, expires: 0:1:25
via neighbor: 30.1.1.1 version: 3.255 flags: VPGN gen id: 0xaa4ee1fa
40.40.40.0/24 [2] uptime: 1:24:2, expires: 0:2:3
via neighbor: 40.1.1.3 version: 3.255 flags: VPGN gen id: 0x336ff052 40.1.1.0/
24 [1] uptime: 1:24:8, expires: 0:0:0
via: local
30.1.1.0/24 [1] uptime: 1:24:20, expires: 0:0:0
via: local