Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 708 / 944

Configuring RIP accept-lifetime
21-10 Routing Protocol Configuration
Parameters
Defaults
None.
Mode
Router command, Key chain key configuration: Matrix>Router(config-keychain-key)#
Usage
The “no” form of this command removes the authentication string.
Example
This example shows how to create an authentication string called “password” for key 3 in the
“md5key” key chain:
Matrix>Router(config-router)#key chain md5key
Matrix>Router(config-keychain)#key 3
Matrix>Router(config-keychain-key)#key-string password
accept-lifetime
Use this command to specify the time period during which an authentication key on a key chain is
valid to be received.
Syntax
accept-lifetime start-time month date year { duration seconds | end-time |
infinite }
no accept-lifetime start-time month date year
Parameters
text Specifies the authentication string that must be sent and received in RIP
packets. The string can contain from 1 to 16 uppercase and lowercase
alphanumeric characters, except that the first character cannot be a
number.
start ‐ time Specifies the time of day the authentication key will begin to be valid to
be received. Valid input is hours:minutes:seconds ( hh:mm:ss )
month Specifies the month the authentication key will begin to be valid to be
received. Valid input is the first three letters of the month.
date Specifies the day of the month the authentication key will begin to be
valid to be received. Valid values, depending on the length of the
month, are 1 ‐ 31 .
year Specifies the year the authentication key will begin to be valid to be
received. Valid input is four digits up to 2035 .
duration seconds Length of time (in seconds) the key is valid to be received. Valid values
are 1 ‐ 4294967295 .