Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 190 / 944

Setting Console Port Properties show console
4-4 Port Configuration
show console
Use this command to display properties set for one or more console ports.
Syntax
show console [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, properties for all console ports will be displayed.
Mode
Switch command, Read ‐ Only.
Example
This example shows how to display properties for console port com.1.1:
Matrix(rw)->show console com.1.1
Port Baud Flow Bits StopBits Parity Autobaud
------------ ------ ------ ---- ---------- ------ --------
com.1.1 38400 ctsrts 8 one none disable
clear console
Use this command to clear the properties set for one or more console ports.
Syntax
clear console [ port-string ]
show console bits 4-8
set console bits 4-8
clear console bits 4-9
show console stopbits 4-9
set console stopbits 4-10
clear console stopbits 4-10
show console parity 4-11
set console parity 4-11
clear console parity 4-12
For information about... Refer to page...
port ‐ string (Optional) Displays properties for specific console port(s)