Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 798 / 944

Understanding Transparent Web Cache Balancing (TWCB) show router limits (TWCB)
23-16 Transparent Web Cache Balancing Configuration
Parameters
Defaults
None.
Mode
Switch Command: Matrix(rw) ‐ > .
Usage
Bindings and cache use valuable memory resources and are shared on a first come first serve basis
across a number of applications. Use this command to free memory resources to be user by other
applications by limiting the number of TWCB bindings and cache size allowed.
Currently, only a single web ‐ cache is supported. The TWCB configs setting exists for future use.
The chassis or system must be rebooted for any new change to take effect.
This command must be executed from the switch CLI.
Example
This example sets the maximum TWCB cache size to 5000:
Matrix(rw)-> set router limits twcb-cache 5000
show router limits (TWCB)
Use this command to display TWCB router limit configuration settings.
Syntax
show router limits [ twcb-bindings ] [ twcb-cache ] [ twcb-configs ]
Parameters
Defaults
If no parameter is specified, all router limit settings are displayed.
twcb ‐ bindings
twcb ‐ bindings
(Optional) Specifies the maximum number of TWCB bindings for this
router. Values range from 1000 to 32000. Default value of 32000.
twcb ‐ cache twcb ‐ cache (Optional) Specifies the maximum TWCB cache size for this router.
Values range from 500 to 10000. Default value of 2000.
twcb ‐ configs
twcb ‐ configs
(Optional) Specifies the maximum number of web ‐ cache configurations.
Maximum and Default value of 1.
Note: Router limits can also be set in the following contexts:
To set LSNAT router limits see set router limits (LSNAT) on page 19-33 .
To set NAT router limits see set router limits (NAT) on page 18-14 .
twcb ‐ bindings (Optional) Displays the TWCB maximum bindings limit.
twcb ‐ cache (Optional) Displays the TWCB cache size limit.
twcb ‐ configs (Optional) Displays the TWCB configuration limit.