Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 931 / 944

show multiauth session Configuring Multiple Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 27-9
Mode
Switch command, Read ‐ Write.
Example
This example shows how to clear the multiple authentication station entry associated with port
fe.1.20:
Matrix(rw)->clear multiauth station port fe.1.20
show multiauth session
Use this command to display multiple authentication session entries.
Syntax
show multiauth session [ all ] [ agent { dot1x | mac | pwa | cep }] [ mac address ] [ port
port-string ]
Parameters
Defaults
If no options are specified, multiple authentication session entries will be displayed for all
sessions, authentication types, MAC addresses, and ports.
Mode
Switch command, Read ‐ Only.
Example
This example shows how to display multiple authentication session:
Matrix(rw)->show multiauth session
Multiple authentication session entries
-----------------------------------------
Port : fe.2.2 Station address : 00-01-f4-2b-4f-8b
Auth status : success Last attempt : MON MAY 08 14:34:42 2006
Agent type : pwa Session applied : true
Server type : radius VLAN-Tunnel-Attr : None
Policy index : 0 Policy name : No policy applied
Session timeout : 43200 Session duration : 0,00:01:01
Idle timeout : 300 Idle time : 0,00:00:00
all (Optional) Displays information about all sessions, including those
with terminated status.
agent | dot1x | mac |
pwa | cep
(Optional) Displays 802.1X, MAC, CEP, or port web authentication
session information.
mac address (Optional) Displays multiple authentication session entries for specific
MAC address(es).
port port ‐ string (Optional) Displays multiple authentication session entries for specific
port(s).