Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 857 / 944

set pwa ipaddress Configuring Port Web Authentication (PWA)
Enterasys Matrix DFE-Gold Series Configuration Guide 25-19
Defaults
None.
Mode
Switch command, Read ‐ Write.
Example
This example shows how to set the PWA redirect time to 10 seconds:
Matrix(rw)->set pwa redirecttime 10
set pwa ipaddress
Use this command to set the PWA IP address.
Syntax
set pwa ipaddress ip-address
Parameters
Defaults
None.
Mode
Switch command, Read ‐ Write.
Usage
This is the IP address of the end station from which PWA will prevent network access until the
user is authenticated.
Example
This example shows how to set a PWA IP address of 1.2.3.4:
Matrix(rw)->set pwa ipaddress 1.2.3.4
set pwa protocol
Use this command to set the port web authentication protocol.
Syntax
set pwa protocol { chap | pap }
ip ‐ address Specifies a globally unique IP address. This same value must be
configured into every authenticating switch in the domain.