Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 934 / 944

Configuring Multiple Authentication show multiauth session-timeout
27-12 MultiAuth Configuration
Defaults
If no authentication type is specified, the idle timeout value is returned to 300 seconds for all
authentication types.
Mode
Switch command, Read ‐ Write.
Examples
This example shows how to clear the idle ‐ timeout session values for cep and mac authentication
types, back to default value of 300 seconds:
Matrix(rw)->clear multiauth idle-timeout cep
Matrix(rw)->clear multiauth idle-timeout mac
This example shows how to clear the idle ‐ timeout session values for all authentication types, back
to the default value of 300 seconds:
Matrix(rw)->set multiauth idle-timeout
show multiauth session-timeout
Use this command to display session ‐ timeout values, in seconds, for all authentication methods.
Syntax
show multiauth session-timeout
Parameters
None
Defaults
None.
Mode
Switch command, Read ‐ Only.
Example
This example shows how to display multiple authentication session ‐ timeout values, for an active
session:
Matrix(rw)->show multiauth session-timeout
Authentication type Timeout (sec)
------------------- -------------
dot1x 0
pwa 0
mac 0
cep 0