Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 153 / 944

set cdp auth Enterasys Discovery Protocol
Enterasys Matrix DFE-Gold Series Configuration Guide 3-5
Parameters
Defaults
If port ‐ string is not specified, the CDP state will be globally set.
Mode
Switch command, Read ‐ Write.
Examples
This example shows how to globally enable CDP:
Matrix(rw)->set cdp state enable
This example shows how to enable the CDP for port fe.1.2:
Matrix(rw)->set cdp state enable fe.1.2
This example shows how to disable the CDP for port fe.1.2:
Matrix(rw)->set cdp state disable fe.1.2
set cdp auth
Use this command to set a global CDP authentication code.
Syntax
set cdp auth auth ‐ code
Parameters
Defaults
None.
Mode
Switch command, Read ‐ Write.
Usage
This value determines a device’s CDP domain. If two or more devices have the same CDP
authentication code, they will be entered into each other ʹ s CDP neighbor tables. If they have
different authentication codes, they are in different domains and will not be entered into each
other’s CDP neighbor tables.
auto | disable |
enable
Auto ‐ enables, disables or enables the CDP protocol on the specified
port(s). In auto ‐ enable mode, which is the default mode for all ports, a
port automatically becomes CDP ‐ enabled upon receiving its first CDP
message.
port ‐ string (Optional) Enables or disables CDP on specific port(s). For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 4 ‐ 2.
auth ‐ code Specifies an authentication code for the CDP protocol. This can be up to
16 hexadecimal values separated by commas.