Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 929 / 944

clear multiauth port Configuring Multiple Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 27-7
Parameters
Defaults
None.
Mode
Switch command, Read ‐ Write.
Examples
This example shows how to set the port multiple authentication mode to required on ge.3.14:
Matrix(rw)->set multiauth port mode auth-reqd ge.3.14
clear multiauth port
Use this command to clear multiple authentication properties for one or more ports.
Syntax
clear multiauth port {[ mode ] [ numusers ] port-string }
Parameters
Defaults
None.
Mode
Switch command, Read ‐ Write.
Examples
This example shows how to clear the port multiple authentication mode on all 1 ‐ Gigabit Ethernet
ports:
Matrix(rw)->clear multiauth port mode ge.*.*
mode auth ‐ opt |
auth ‐ reqd | force ‐
auth | f orce ‐ unauth
Specifies the port(s)’ multiple authentication mode as:
• auth ‐ opt — Authentication optional
• auth ‐ reqd — Authentication required
• force ‐ auth — Authentication considered
• force ‐ unauth — Authentication disabled
numusers numusers Specifies the number of users allowed authentication on port(s).
port ‐ string Specifies the port(s) on which to set multiple authentication properties.
mode Clears the port(s)’ multiple authentication mode.
numusers Clears the value set for the number of users allowed authentication on
port(s).
port ‐ string Specifies the port(s) on which to clear multiple authentication
properties.