Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 902 / 944

Configuring show tacacs
25-64 Authentication Configuration
Mode
Switch command, Read ‐ Only.
Example
This example shows how to display all TACACS configuration information:
Matrix(ro)->show tacacs
state: enabled
session accounting state: disabled
command authorization state: disabled
command accounting state: disabled
single-connect state: disabled
service: exec
session authorization A-V pairs:
access level attribute value
read-only 'priv-lvl' '0'
read-write 'priv-lvl' '1'
super-user 'priv-lvl' '15'
Server IP Address Port Timeout Status
-------------- --------------- ----- ------- -------
1 10.1.26.245 49 10 Active
Table 25 ‐ 5 provides an explanation of the command output.
Table 25-5 show tacacs Output Details
Output... What it displays...
state Whether the client is enabled or disabled .
session accounting
state Whether session accounting is enabled or disabled .
command
authorization state Whether command authorization is enabled or disabled .
command accounting
state Whether command accounting is enabled or disabled .
singleconnect state Whether singleconnect is enabled or disabled .
When enabled, the client sends multiple requests over a
single TCP connection.
service The name of the service that is requested by the client for
session authorization. “exec” is the default service name.
session authorization
A-V pairs Displays the attribute – value pairs that are mapped to the Matrix read-
only , read-write , and super-user access privilege levels for the
service requested for session authorization.
The attribute names and values shown in the example above are the
default values.
Server Displays the server information used by the
client.