Enterasys Enterasys Matrix DFE-Gold Series, Configuration Manual

Page: 219 / 944

clear port mdix Setting Auto-Negotiation and Advertised Ability
Enterasys Matrix DFE-Gold Series Configuration Guide 4-33
clear port mdix
Use this command to reset MDIX mode to the default setting of auto on one or more ports.
Syntax
clear port mdix [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, mode will be reset for all ports.
Mode
Switch command, Read ‐ Write.
Example
This example shows how to reset 1 ‐ Gigabit Ethernet port 14 in module 3 to auto MDI/MDIX
configuration:
Matrix(rw)->set port mdix ge.3.14
show port advertise
Use this command to display the advertised ability on one or more ports.
Syntax
show port advertise [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, advertised ability for all ports will be displayed.
Mode
Switch command, Read ‐ Only.
Example
This example shows how to display advertised ability fe.1.16:
Matrix(rw)->show port advertise fe.1.16
fe.1.16 capability advertised remote
----------------------------------------------
port ‐ string (Optional) Resets mode for specific port(s). For a detailed description of
possible port ‐ string values, refer to “ Port String Syntax Used in the CLI ”
on page 4 ‐ 2.
port ‐ string (Optional) Displays advertised ability for specific port(s). For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 4 ‐ 2.