EnGenius EWS5912FP User Manual Download Page 53

Page: 53 / 207

Status Dashboard

Total:

Displays the total memory storage space allocated

for uploading custom floorplans.

Available:

Display the memory storage space that is currently

available.

In Use:

Displays the memory storage space that is

currently in use.

Image:

Shows a preview of a custom uploaded image.

Name:

Shows the name of the custom uploaded image.

Image Size:

Displays th e file size of the custom uploaded

image.

Managing Images

Add

: Uploads a new image. The campatible

formats are: GIF, PNG or JPG format, up to

819 KB per image.

Edit:

Edits the name of the uploaded image.

Delete

: Removes an uploaded image.

Floorplan View

Floor View

From this page, the administrator can place Access
Points onto the custom uploaded image by drag-
ging-and-dropping markers in the Access Point list.

Summary of Contents for EWS5912FP
















































































































































































































Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands

EnGenius EWS5912FP, User Manual

Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands