EnGenius EWS5912FP User Manual Download Page 156

Page: 156 / 207

156

State:

Select whether QoS is enabled or disabled

on the switch.

Scheduling Method:

Selects the Strict Priority or WRR to specify

the traffic scheduling method.

• Strict Priority –

Specifies traffic

scheduling based strictly on the queue

priority.

• WRR –

Use the Weighted

Round-Robin (WRR) algorithm to handle

packets in priority classes of service. It

assigns WRR weights to queues.

Trust Mode:

Select which packet fields to use for clas

sifying packets entering the Switch.

•

DSCP

– Classify traffic based on

the DSCP (Differentiated Services Code

Point) tag value.

•

–Classify traffic based on the

802.1p. The eight priority tags that are

specified in IEEE802.qp are from 1 to 8.

Click

Apply

to save the changes to the system.

Summary of Contents for EWS5912FP
















































































































































































































Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands

EnGenius EWS5912FP, User Manual

Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands