EnGenius EWS5912FP User Manual Download Page 63

Page: 63 / 207

Bulk Upgrade

The Bulk Upgrade feature allows administrators to up-

grade the firmware of multiple Aaccess Points at the

same time. After selecting

Bulk Upgrade

under

Mainte-

nance

, the page will display devices that are available to

currently upgrade. Click

Upload New File

to search for

new firmware for the device(s).

Model:

Displays the model number of the Access

Point.

Firmware Version:

Displays the current firmware version in

use.

File Name:

Displays the file name of the firmware

uploaded.

Image Size:

Displays the size of the firmware

uploaded in bytes.

Upload Time:

Displays the time at which the firmware

was uploaded.

Device List

This list displays all the current Access Points connected
to the controller. Click on the Access Points you wish to
upgrade. If multiple Access Points are connected, you

can search for specific Access Points via the search bar

at the boittom right of the page. Click

Add

to Upgrade

select devices you wish to upgrade.

Summary of Contents for EWS5912FP
















































































































































































































Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands

EnGenius EWS5912FP, User Manual

Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands