manualshive.com logo in svg

EnGenius EWS5912FP, User Manual

The EnGenius EWS5912FP is a cutting-edge networking device that combines a 10 Gigabit Ethernet switch with Power over Ethernet (PoE) technology. This versatile device empowers users with advanced connectivity options and advanced features. Enhance your experience with a comprehensive User Manual, available for free download at manualshive.com.

Share
Download
background image

16

Connecting the Switch to a Network

Discovery in a Network with a DHCP Server

Use this procedure to setup the Switch within a network 
that uses DHCP.

1. 

Connect the supplied Power Cord to the Switch and  

    plug the other end into an electrical outlet. Verify the  
    power LED indicator is lit on the Switch. 

2. 

Wait for the Switch to complete booting up. It might take  

    a minute for the Switch to completly boot up.

3. 

Connect one end of a Category 5/6 Ethernet cable into  

    the Gigabit (10/100/1000) Ethernet port on the Switch  
    front panel and the other end to the Ethernet port on the  
    computer. Verify that the LED on the Ethernet ports of the  
  Switch are 

green

.

4. 

Once your computer is on, ensure that your TCP/IP is set  

  to 

On

 or 

Enabled

. Open

 Network Connections

 and then  

  click 

Local Area Connecton

. Select 

Internet Protocol  

    Version 4 (TCP/IPv4)

. If your computer is already on a  

    network, ensure that you have set it to a Static IP Address  

    on the Interface (Example: 192.168.0.10 and the Subnet 

 

    mask address as 255.255.255.0).

 

5. 

Open a web browser on your computer. In the address  

    bar of the web browser, enter 

192.168.0.239

 and click  

  

Enter

.

6.

  A  login  screen  will  appear.  By  default,  the                                                                                                      

  username is 

admin

 and the password is 

password

.  

       Enter the current password of the Switch and then  
      click 

Login

.

7.

  Once logged in, click 

IP Settings 

under the System tab  

    and select IPv4 or IPv6. 

8.

   Click 

DHCP 

under Auto-Configuration.

9.

 Click 

Apply

 to save the settings.

10.

  Connect the Switch to your network (DHCP enabled).

11.

 On the DHCP server, find and write down the IP address 

 

    allocated to the device. Use this IP address to access  
    the management interface.

Summary of Contents for EWS5912FP
















































































































































































































Reviews:

No comments

Related manuals for EWS5912FP

Vivotek NR8401 User Manual preview
NR8401
Brand: Vivotek Pages: 136
Xilica Audio Design XP 4080 User Manual preview
XP 4080
Brand: Xilica Audio Design Pages: 30
Cypress Semiconductor CY62148E Specification Sheet preview
CY62148E
Brand: Cypress Semiconductor Pages: 10
SMC Networks Barricade SMC7901WBRA2 Installation Manual preview
Barricade SMC7901WBRA2
Brand: SMC Networks Pages: 2
Netis DL4305D Quick Installation Manual preview
DL4305D
Brand: Netis Pages: 16
Promise Technology FastTrak TX4000 User Manual preview
FastTrak TX4000
Brand: Promise Technology Pages: 76
NetComm 4GM3W User Manual preview
4GM3W
Brand: NetComm Pages: 65
Extron electronics VERSATOOLS MTP User Manual preview
VERSATOOLS MTP
Brand: Extron electronics Pages: 19
Camozzi UVIX Use And Maintenance Manual preview
UVIX
Brand: Camozzi Pages: 22
TEC Control WiDiCast User Manual preview
WiDiCast
Brand: TEC Control Pages: 4
ATEN Altusen SN0100 Series User Manual preview
Altusen SN0100 Series
Brand: ATEN Pages: 178
TP-Link TD-8840 User Manual preview
TD-8840
Brand: TP-Link Pages: 25
Allied Telesis AT-WR4500 Series User Manual preview
AT-WR4500 Series
Brand: Allied Telesis Pages: 264
N-Tron 900B Installation & User Manual preview
900B
Brand: N-Tron Pages: 21
H3C MSR 2600 Installation, Quick Start preview
MSR 2600
Brand: H3C Pages: 4
Ubiquiti 3GStation Professional Quick Start Manual preview
3GStation Professional
Brand: Ubiquiti Pages: 24
Behringer MU-A043666 Quick Start Manual preview
MU-A043666
Brand: Behringer Pages: 12
National Datacomm 9210S01 User Manual preview
9210S01
Brand: National Datacomm Pages: 62

Brands by name

Popular brands

Load more brands