manualshive.com logo in svg

EnGenius EWS5912FP, User Manual

The EnGenius EWS5912FP is a cutting-edge networking device that combines a 10 Gigabit Ethernet switch with Power over Ethernet (PoE) technology. This versatile device empowers users with advanced connectivity options and advanced features. Enhance your experience with a comprehensive User Manual, available for free download at manualshive.com.

Share
Download
background image

101

MST ID: 

Displays the ID of the MST that is created.

VLAN List:

Enter the VLAN ID to associate with the MST 

ID.

Priority:

 

Select the bridge priority value. When Switches 

or bridges are running STP, each is assigned a 

priority. The default value is 32768. The range 

is from 0-61440. The bridge priority value is 

provided in increments of 4096.

Regional Root 

Bridge:

 

Displays the bridge ID for the selected MST 

instance.

Internal Root 

Cost:

Displays the path cost to the designated root 

for the MST instance.

Designated 

Bridge:

Displays the bridge ID of the root bridge.

Root Port:

 

Displays the port that accesses the designated 

root for MST instance.

Configuration 

Name:

This name uniquely identifies the MSTI (Multi

-

ple Spanning Tree Instance). Enter a descrip-

tive name (up to 32 characters) for an MST 

region. The default is the MAC address name of 

the device running MSTP.

Configuration 

Reversion:

This value, along with the Configuration Name, 

identifies the MSTP region configured on the 

Switch. Devices must have the same revision 

number to belong to the same region.

Click the 

Apply

 button  

  to accept the changes or the 

Cancel

 button  

  to discard them.

Summary of Contents for EWS5912FP
















































































































































































































Reviews:

No comments

Related manuals for EWS5912FP

Quatech DS-3000 User Manual preview
DS-3000
Brand: Quatech Pages: 27
SIIG NN-EC2812-S1 Quick Installation Manual preview
NN-EC2812-S1
Brand: SIIG Pages: 12
WaiLan DeltaFire 500 User Manual preview
DeltaFire 500
Brand: WaiLan Pages: 27
Qixiang Technology QR310 Installation And Configuration Quick Manual preview
QR310
Brand: Qixiang Technology Pages: 16
Internet Security Systems Proventia A1204 User Manual preview
Proventia A1204
Brand: Internet Security Systems Pages: 42
Edgewater Networks 200EW/E Quick Start Manual preview
200EW/E
Brand: Edgewater Networks Pages: 7
National Instruments PCI-6110E/6111E User Manual preview
PCI-6110E/6111E
Brand: National Instruments Pages: 113
Jøtul ERS 01 Operation And Maintenance Manual preview
ERS 01
Brand: Jøtul Pages: 20
Arbor Technology Em104P-i2904 Quick Installation Manual preview
Em104P-i2904
Brand: Arbor Technology Pages: 8
B-G Instruments DataPlot CB1224 Manual preview
DataPlot CB1224
Brand: B-G Instruments Pages: 4
Morrell SW-UNM-24FE2GC-24POE User Manual preview
SW-UNM-24FE2GC-24POE
Brand: Morrell Pages: 8
Aqua Computer Aquaduct 240 eco Operating And Assembly Manual preview
Aquaduct 240 eco
Brand: Aqua Computer Pages: 20
Promise Technology VTrak J310S Quick Start Manual preview
VTrak J310S
Brand: Promise Technology Pages: 26
Solwise 3GWIFIMRD User Manual preview
3GWIFIMRD
Brand: Solwise Pages: 231
Paradyne FrameSaver DSL 9788 Router Installation Instructions Manual preview
FrameSaver DSL 9788 Router
Brand: Paradyne Pages: 28
Icy Box IB-NAS5520 Quick Start Manual preview
IB-NAS5520
Brand: Icy Box Pages: 2
LevelOne WAB-3000 How To Set Up preview
WAB-3000
Brand: LevelOne Pages: 11
Fluke Network Tester User Manual preview
Network Tester
Brand: Fluke Pages: 102

Brands by name

Popular brands

Load more brands