manualshive.com logo in svg

EnGenius EWS5912FP, User Manual

The EnGenius EWS5912FP is a cutting-edge networking device that combines a 10 Gigabit Ethernet switch with Power over Ethernet (PoE) technology. This versatile device empowers users with advanced connectivity options and advanced features. Enhance your experience with a comprehensive User Manual, available for free download at manualshive.com.

Share
Download
background image

190

Diagnostics

Cable Diagnostics

Cable Diagnostics helps you to detect whether your cable 
has connectivity problems provides information about 
where errors have occurred in the cable. The tests use Time 

Domain Reflectometry (TDR) technology to test the quality 

of a copper cable attached to a port. TDR detects a cable 
fault by sending a signal through the cable and reading 

the signal that is reflected back. All or part of the signal is 
reflected back either by cable defects or by the end of the 

cable when an issue is present. Cables are tested when the 
ports are in the down state, with the exception of the cable 
length test.

Port:

Select the port to which the cable is 

connected. Pair (A, B, C, and D): Displays 

the cable test results.

• 

Open

 – A cable is not connected to the 

port.

• 

OK

 – A cable is connected to the port.

Cable Length (A, B, 

C, and D):

 Displays the approximate cable length.

To verify accuracy of the test, it is reccomended that you 
run multiple tests in case of a test fault or user error.

Click 

Test

 to perform the cable tests for the selected port.

Summary of Contents for EWS5912FP
















































































































































































































Reviews:

No comments

Related manuals for EWS5912FP

Datasat AP20 Installation And Operating Manual preview
AP20
Brand: Datasat Pages: 32
Rain Bird E-3 Installation, Programming & Operation Manual preview
E-3
Brand: Rain Bird Pages: 17
National Instruments NI 5922 Calibration Procedure preview
NI 5922
Brand: National Instruments Pages: 28
National Instruments NI 9219 Getting Started preview
NI 9219
Brand: National Instruments Pages: 19
National Instruments NI 9219 Operating Instructions Manual preview
NI 9219
Brand: National Instruments Pages: 36
National Instruments NI 6711 User Manual preview
NI 6711
Brand: National Instruments Pages: 103
National Instruments NI PXI-1042 Series Installation Manual preview
NI PXI-1042 Series
Brand: National Instruments Pages: 12
National Instruments PCI-1407 Setup And Operation preview
PCI-1407
Brand: National Instruments Pages: 4
ekwb EK-FC780 GTX Jetstream Installation And Mounting Manual preview
EK-FC780 GTX Jetstream
Brand: ekwb Pages: 2
Accusys ACS-76500 Owner'S Manual preview
ACS-76500
Brand: Accusys Pages: 34
ekwb EK-FC1080 GTX Ti TF6 Installation Manual preview
EK-FC1080 GTX Ti TF6
Brand: ekwb Pages: 2
Intellinet 523318 Instructions preview
523318
Brand: Intellinet Pages: 2
ZALMAN Extreme Gaming VGA Cooler GV1000 User Manual preview
Extreme Gaming VGA Cooler GV1000
Brand: ZALMAN Pages: 7
Disc Makers Reflex10 User Manual preview
Reflex10
Brand: Disc Makers Pages: 38
Corsair LL140 RGB Series Manual preview
LL140 RGB Series
Brand: Corsair Pages: 30
Netequalizer NE3000-10 Quick Start Manual preview
NE3000-10
Brand: Netequalizer Pages: 14
CSI 7798 I/SITE LAN Installation Manual preview
7798 I/SITE LAN
Brand: CSI Pages: 56
StetSom STX2448 User Manual preview
STX2448
Brand: StetSom Pages: 18

Brands by name

Popular brands

Load more brands