manualshive.com logo in svg

EnGenius EWS5912FP, User Manual

The EnGenius EWS5912FP is a cutting-edge networking device that combines a 10 Gigabit Ethernet switch with Power over Ethernet (PoE) technology. This versatile device empowers users with advanced connectivity options and advanced features. Enhance your experience with a comprehensive User Manual, available for free download at manualshive.com.

Share
Download
background image

122

Jumbo Frame

Ethernet has used the 1500 byte frame size since its 
inception. Jumbo frames are network-layer PDUs that 
have a size much larger than the typical 1500 byte 
Ethernet Maximum Transmission Unit (MTU) size. Jumbo 

frames extend Ethernet to 9000 bytes, making them 

large enough to carry an 8 KB application datagram plus 
packet header overhead. If you intend to leave the local 
area network at high speeds, the dynamics of TCP will 
require you to use large frame sizes.

The EnGenius Layer 2 Switch supports a Jumbo Frame 

size of up to 9216 bytes. Jumbo frames need to be 
configured to work on the ingress and egress port of 

each device along the end-to-end transmission path. 
Furthermore, all devices in the network must also be 
consistent on the maximum Jumbo Frame size, so it is 
important to do a thorough investigation of all your 
devices in the communication paths to validate their 
settings.

Jumbo Frame: 

Enter the size of jumbo frame. The 

range is from 1522-9216 bytes.

Enter the size of jumbo frame. The range is from 1522-

9216 bytes. Click 

APPLY

 to update the the system 

settings.

Summary of Contents for EWS5912FP
















































































































































































































Reviews:

No comments

Related manuals for EWS5912FP

Cypress Semiconductor CY7C1034DV33 Specification Sheet preview
CY7C1034DV33
Brand: Cypress Semiconductor Pages: 9
Roland VP-9000 Turbostart preview
VP-9000
Brand: Roland Pages: 2
Realtek RTL8187SE User Manual preview
RTL8187SE
Brand: Realtek Pages: 30
National Instruments PCI-6110E/6111E User Manual preview
PCI-6110E/6111E
Brand: National Instruments Pages: 113
MF DIGITAL DIRECTOR PRO series Operator'S Manual preview
DIRECTOR PRO series
Brand: MF DIGITAL Pages: 79
Glacier G2080TiFE Installation Manual preview
G2080TiFE
Brand: Glacier Pages: 2
Arbor Technology Em104P-i2904 Quick Installation Manual preview
Em104P-i2904
Brand: Arbor Technology Pages: 8
GarrettCom Industrial Network Track OSI Brochure preview
Industrial Network Track OSI
Brand: GarrettCom Pages: 10
Adaptec 2410SA - Serial ATA RAID Controller Hardware Installation Manual preview
2410SA - Serial ATA RAID Controller
Brand: Adaptec Pages: 14
Renesas R0E001000ACB00 User Manual preview
R0E001000ACB00
Brand: Renesas Pages: 4
Commell FS-A79 User Manual preview
FS-A79
Brand: Commell Pages: 36
CAME 848EA-0120 Setup And User'S Manual preview
848EA-0120
Brand: CAME Pages: 32
National Instruments IMAQTM User Manual preview
IMAQTM
Brand: National Instruments Pages: 121
Renesas R0E0144TNPFK00 User Manual preview
R0E0144TNPFK00
Brand: Renesas Pages: 4
Tripp Lite P581-006 Specification Sheet preview
P581-006
Brand: Tripp Lite Pages: 2
Loxit 6026 Lapbank 16 mini Cable Installation preview
6026 Lapbank 16 mini
Brand: Loxit Pages: 2
LevelOne ServCon FPS-3003 Quick Install Manual preview
ServCon FPS-3003
Brand: LevelOne Pages: 45
DarbeeVision Dablet DVP 5000 User Manual preview
Dablet DVP 5000
Brand: DarbeeVision Pages: 10

Brands by name

Popular brands

Load more brands