EnGenius EWS5912FP User Manual Download Page 46

Page: 46 / 207

Advanced Settings

Clicking on the cluster field of an Access Point will direct
you to a Wireless Settings page where you can configure

settings for the selected cluster.

Band

Steering

Click to enable or disable the Band Steering

function for the cluster. Note that the 2.4 GHz and

5 GHz SSIDs must have the same security settings.

Fast

Handover:

With Fast Handover enabled, the Access Point

will send a disassociation request to the wireless

client and let it find another Access Point to

handover and associate upon detecting the

wireless client’s RSSI value lower than specified.

The RSSI value can be adjusted to allow for more

clients to stay associated to this Access Point.

Note that setting the RSSI value too low may

cause wireless clients to reconnect frequently.

The range is from -90 dBm~60 dBm.

Guest

Network:

The Guest Network feature allows administrators

to grant Internet connectivity to visitors or guests

while keeping other networked devices and

sensitive personal or company information private

and secure.

Manual IP Settings

IP address:

Specify an IP address for the Guest Network.

Subnet

mask:

Specify the Subnet mask IP address for the Guest

Network.

Starting IP

address:

Specify the starting IP address range for the

Guest Network.

Ending IP

address:

Specify the ending IP address range for the

Guest Network.

WINS Server

IP:

Specify the Windows Internet Name Service

(WINS) Server IP address for the Guest Network.

WINS is Microsoft’s implementation of NetBIOS

Name Service (NBNS), a name server and service

for NetBIOS computer names.

Automatic DHCP Server Settings

Starting IP

address:

Enter the staring IP adrress that you would like

to use.

Ending IP

address:

Enter the final IP address that you would like to

use.

WINS Server IP:

Enter the WINS Server IP adress for the cluster.

Summary of Contents for EWS5912FP
















































































































































































































Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands

EnGenius EWS5912FP, User Manual

Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands