EnGenius EWS5912FP User Manual Download Page 142

Page: 142 / 207

142

User List

Use the User List page to create SNMP users for authen-
tication with managers using SNMP v3 to associate them
to SNMP groups. Click

Add

to add a new user.

Privilege Mode:

Select

No Auth

Auth

, or

Priv

se-

curity level from the list.

• No auth –

Neither authen-

tication nor the privacy security

levels are assigned to the group.

• Auth –

and ensures that

the origin of the SNMP message is

authenticated.

• Priv –

Encrypts SNMP

messages.

Authentication Protocol:

Select the method used to au-

thenticate users.

• MD5 –

Using the HMAC-

MD5 algorithm.

• SHA –

Using the HMAC-

SHA-96 authentication level.

Enter the SHA password and the

HMAC-SHA-96 password to be

used for authentication.

Authentication Password:

Enter MD5 password and the

HMAC-MD5-96 password to be

used for authentication.

Encryption Protocol:

Select the method used to au-

thenticate users.

• None –

No user authenti-

cation is used.

• DES –

Using the Data En-

cryption Standard algorithm.

Encryption Key:

Enter the Data Encryption Stan-

dard key.

Click the

Apply

button

to accept the changes or the

Summary of Contents for EWS5912FP
















































































































































































































Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands

EnGenius EWS5912FP, User Manual

Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands