manualshive.com logo in svg

EnGenius EWS5912FP, User Manual

The EnGenius EWS5912FP is a cutting-edge networking device that combines a 10 Gigabit Ethernet switch with Power over Ethernet (PoE) technology. This versatile device empowers users with advanced connectivity options and advanced features. Enhance your experience with a comprehensive User Manual, available for free download at manualshive.com.

Share
Download
background image

79

EEE

Energy Efficient Ethernet (EEE), an Institute of Electrical 

and Electronics Engineers (IEEE) 802.3az standard, 
reduces the power consumption of physical layer devices 
during periods of low link utilization. EEE saves energy 
by allowing PHY non-essential circuits shut down when 

there is no traffic.

Network administrators have long focused on the energy 

efficiency of their infrastructure, and the EnGenius Layer 2 
Switch complies with the IEEE’s Energy-Efficient Ethernet 

(EEE) standard to give you even more control. The EEE-
compliant Switch offers users the ability to utilize power 
that Ethernet links use only during data transmission. 
Lower Power Idle (LPI) is the method for achieving the 
power saving during Ethernet idel time.

Use the EEE Configuration page to configure Energy 
Efficient Ethernet.

Port:

Display the port for which the EEEE setting is 

displayed.

EEE Status: Enable

 or 

Disable

 EEE for the specified port.

Click 

APPLY

 to update the system settings.

Summary of Contents for EWS5912FP
















































































































































































































Reviews:

No comments

Related manuals for EWS5912FP

Hama 53107 Operating Instruction preview
53107
Brand: Hama Pages: 10
Yamaha EMP100 Supplementary Manual preview
EMP100
Brand: Yamaha Pages: 4
Commell LS-570 User Manual preview
LS-570
Brand: Commell Pages: 58
Tripp Lite N48M Series Installation Manual preview
N48M Series
Brand: Tripp Lite Pages: 20
ZyXEL Communications P-336M Quick Start Manual preview
P-336M
Brand: ZyXEL Communications Pages: 125
Longshine LCS-8131G3 User Manual preview
LCS-8131G3
Brand: Longshine Pages: 27
XtendLan NVR-xUD User Manual preview
NVR-xUD
Brand: XtendLan Pages: 228
M86 Security M86 Web Filter User Manual preview
M86 Web Filter
Brand: M86 Security Pages: 309
Moxa Technologies PT-7324 Series User Manual preview
PT-7324 Series
Brand: Moxa Technologies Pages: 36
Delta Electronics LonWorks Communication Module LN-01 Instruction Sheet preview
LonWorks Communication Module LN-01
Brand: Delta Electronics Pages: 1
AMX AXB-PSCV Dimensional Drawing preview
AXB-PSCV
Brand: AMX Pages: 1
XAVI Technologies Corp. X7822r User Manual preview
X7822r
Brand: XAVI Technologies Corp. Pages: 63
Cypress Semiconductor CY7C1303BV25 Specification Sheet preview
CY7C1303BV25
Brand: Cypress Semiconductor Pages: 19
US Robotics uShare USR8710 User Manual preview
uShare USR8710
Brand: US Robotics Pages: 180
Calix GS2020E GigaSPIRE BLAST Quick Start Manual preview
GS2020E GigaSPIRE BLAST
Brand: Calix Pages: 15
Tripp Lite P581-006 Specification Sheet preview
P581-006
Brand: Tripp Lite Pages: 2
Aerotech QNP3 Series Hardware Manual preview
QNP3 Series
Brand: Aerotech Pages: 62
QRS Q-Sync Connection Manual preview
Q-Sync
Brand: QRS Pages: 11

Brands by name

Popular brands

Load more brands