EnGenius EWS5912FP User Manual Download Page 36

Page: 36 / 207

Band

Steering

Click to enable or disable the Band Steering

function for the Access Point. Note that the 2.4

GHz and 5 GHz SSIDs must have the same security

settings.

Fast

Handover:

With Fast Handover enabled, the Access Point

will send a disassociation request to the wireless

client and let it find another AP to handover and

associate upon detecting the wireless client’s

RSSI value lower than specified. The RSSI value

can be adjusted to allow for more clients to stay

associated to this Access Point. Note that setting

the RSSI value too low may cause wireless clients

to reconnect frequently. The range is from -90

dBm~60 dBm.

Guest

Network:

The Guest Network feature allows administrators

to grant Internet connectivity to visitors or guests

while keeping other networked devices and

sensitive personal or company information private

and secure.

Band:

Displays the radio band.

Status:

Displays whether the current SSID profile is

enabled or disabled.

SSID:

Displays the SSID name as it appears to other

wireless clients.

Security:

Displays the security Mode the SSID uses.

Encryption:

Displays the type of data encryption the SSID

uses.

Hidden

SSID:

Displays whether the hidden SSID is enabled or

disabled.

Client

Isolation:

Displays whether the Client Isolation feature is

enabled or disabled.

Advanced Settings

Click on the Advanced Settings tab to further customize
your Access Point settings.

Summary of Contents for EWS5912FP
















































































































































































































Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands

EnGenius EWS5912FP, User Manual

Search results

Summary of Contents for EWS5912FP

Reviews:

Related manuals for EWS5912FP

Brands by name

Popular brands