Endress+Hauser Nanomass Gas Density Operating Instructions Manual Download Page 32

Page: 32 / 92

Operating options

Nanomass Gas Density

Hauser

Device configuration and device functions

Measured value display

The measuring variables listed below are displayed along with their unit in the measured

value display area. The display format can be changed via the parameter settings. A red

signal to the right of the measured value indicates whether this value is being saved to a file.

Measuring variables

Function area

Description

Parameter

Access to the device's operating menu structure; same as local display:
• Configuration of parameters

Real-time
measuring data

Real-time measuring data

Access to current measured values:

• Graphic display of current measured values
• Recording of current measured values (in text file)

Measuring data

retrieval

Measuring data retrieval

Access to the internal data memory:
• Settings for saving measured values

• Export saved measured values (to text file)

Device settings

Access to device information and device settings:
• Display device information
• Configure the communication port (COM port)

• Configure the display delay
• Configure the device clock
• Configure the calibration parameters

• Service functions (protected by a code)

To access the "Device settings" function area, you must enter the access code

0074

in the "Access code for technician mode" field and then press "OK" to confirm.

Measuring variable

Description

Density

Displays the measured density.

Reference Density

Reference density

Displays the calculated reference density. The measuring variable is only displayed if

the "Fixed" parameter value is selected in the "Density function" parameter.

Temperature

Displays the medium temperature measured during density measurement.

Concentration

Displays the calculated concentration of a substance. The measuring variable is only
displayed if the "Concentration Measurement" application package is used and the
"Flexible" parameter value is selected in the "Density function" parameter.

Pressure

Displays the pressure measured by the sensor during density measurement.

Summary of Contents for Nanomass Gas Density





























































































Search results

Summary of Contents for Nanomass Gas Density

Reviews:

Related manuals for Nanomass Gas Density

Brands by name

Popular brands

Endress+Hauser Nanomass Gas Density, Operating Instructions Manual

Search results

Summary of Contents for Nanomass Gas Density

Reviews:

Related manuals for Nanomass Gas Density

Brands by name

Popular brands